Servo Drives & VFDs
The COMBIVERT F5 is the standard frequency inverter for controlled and regulated applications for heavy-duty tasks in machine and installation manufacture with performance in stages up to 900 kW. COMBIVERT F5 is the control solution for both asynchronous AC motors and synchronous servo-drives. KEB COMBIVERT F5-Multi has a very extensive and flexible programming structure. To make the operation and start-up simpler for the user, a special operator level (CP. Parameters) was created in which the most common parameters are found. If the parameters predefined by KEB are not sufficient for your application, an in depth application manual is. This manual do not lay claim on completeness. The pictograms used in this manual mean: Danger Warning Caution Attention observe at all costs Information Help Tip 1.2 Product description This instruction manual describes the frequency inverter series KEB COMBIVERT F5 for lift drives.
The F5 COMBIVERT drive is designed to handle the most difficult applications worldwide and is available up to 1,200 Hp. The F5 platform is extremely flexible and offers configurable safety options, heatsinks, encoder interfaces, and communication ports.
This manual do not lay claim on completeness. The pictograms used in this manual mean: Danger Warning Caution Attention observe at all costs Information Help Tip 1.2 Product description This instruction manual describes the frequency inverter series KEB COMBIVERT F5 for lift drives. Page 2 This Instruction Manual describes the power circuit of the KEBCO COMBIVERT F5 Series Motor Control. It is only valid together with the Instruction Manual Control Stage. Both Instruction Manuals must be made available to the user. Prior to performing any work on the unit the user must familiarize himself with the unit. Page 3: Table Of.
Product Details
Tech Specs
Related
Product Details
The COMBIVERT F5 control card is available in three different performance/feature levels to match application requirements: Basic, Compact, and Application
Available in 230, 480 and 690 VAC classes through 1,200 Hp.
Modular communication operator concept for ultimate flexibility – Supports: EtherNet/IP, ProfiNet, Modbus, EtherCAT, Powerlink, DeviceNet, CAN, Sercos, and Interbus.
Keb Combivert F5 User Manual Pdf Manual
High Speed outputs – Up to 2000Hz output for running high speed, high frequency motors
F5 encoders cards are dual channel with different input and output options. Different versions are available to support different formats, including: Incremental TTL/HTL, Resolver, BiSS, EnDAT, and Hiperface.
The F5 VFD can run with carrier frequencies up to 16kHz and automatically derates if needed.
Tech Specs
Electrical
• Power Range: Up to 1200HP
• Input Voltage Class: 230, 480,690 VAC Classes
• Overload (30 seconds): Varies by unit. In general, 150%
• Rated Switching Frequency: 2 – 16kHz, varies by unit
• Maximum Switching Frequency: 16kHz with derate
• Input Voltage Class: 230, 480,690 VAC Classes
• Overload (30 seconds): Varies by unit. In general, 150%
• Rated Switching Frequency: 2 – 16kHz, varies by unit
• Maximum Switching Frequency: 16kHz with derate
Mechanical
• Cooling Type: Flat back, Fan, Liquid Cooled, Push Through
Certifications
Environment
• Protection Rating: IP20
• Rated Altitude: 1000m with derate possible
• Rated Altitude: 1000m with derate possible
Control
(Application version)
• Motor Types: Induction, PM Servo, Linear, Torque
• Motor Control: V/Hz, SMM, field-orientated with encoder, ASCL, SCL
• Control Types: Velocity, Position, Torque, Homing
• Internal Positioning: Yes. 32-bit register
• Motor Control: V/Hz, SMM, field-orientated with encoder, ASCL, SCL
• Control Types: Velocity, Position, Torque, Homing
• Internal Positioning: Yes. 32-bit register
Options
The following communication interfaces are available:
• Serial, RS232/485 (DIN 66019-II)
• DeviceNet
• Modbus
• Profibus
• Interbus
• CANopen
• Sercos
• Modbus TCP
• Ethernet TCP/IP
• EtherCAT
• Powerlink
• Profinet
• Ethernet/IP
• Serial, RS232/485 (DIN 66019-II)
• DeviceNet
• Modbus
• Profibus
• Interbus
• CANopen
• Sercos
• Modbus TCP
• Ethernet TCP/IP
• EtherCAT
• Powerlink
• Profinet
• Ethernet/IP
Encoder Interfaces
The following feedback devices are supported:
• TTL
• HTL
• Resolver
• Sin/Cos
• SSI-Sin/Cos
• EnDAT 2.1
• EnDAT 2.2
• BiSS
• Hiperface
• UVW
The following feedback devices are supported:
• TTL
• HTL
• Resolver
• Sin/Cos
• SSI-Sin/Cos
• EnDAT 2.1
• EnDAT 2.2
• BiSS
• Hiperface
• UVW
Functional Safety
Dual channel SIL3-rated Safe-Torque-Off (STO) inputs are available as an option.
Dual channel SIL3-rated Safe-Torque-Off (STO) inputs are available as an option.
Heatsinks
The following heatsink options are available:
• Flat back
• Air cooled (fan)
• Liquid cooled
• Push through
The following heatsink options are available:
• Flat back
• Air cooled (fan)
• Liquid cooled
• Push through
Braking Resistor
Backmount braking resistors can be included through the G housing size. This option reduces the panel footprint.
Backmount braking resistors can be included through the G housing size. This option reduces the panel footprint.
EMI Filter
Backmount EMI filters can be included through the H housing size. This option reduces the panel footprint.
Backmount EMI filters can be included through the H housing size. This option reduces the panel footprint.